The combination is factory
set at >>0-0-0<< |
|
Setting your personal combination:
- Open the case. On the back of the lock inside the case you
will see a change lever. Move this change lever to the
middle of the lock so that it hooks behind the change notch (picture 1).
- Set your personal combination turning the dials to the desired combination (choose easy
to remember number).
- Move back the change lever to the normal position (picture 2). (TIP: When finished,
place tape over change lever to prevent accidental movement.)
- To lock your case: set your combination, close the lid and rotate one or more dials
after lid is closed. To open the lock, set your personal combination.
|
| NOTE: The
tumblers must be set to your personal combination before you close your
case. Failure to turn the tumblers to your personal combination before closing the lid
will damage the tumblers and lock you out of your case! |
|
|
 |
|
Copyright
© JELCO, Inc. 2008 All rights reserved.
Site trouble? Please notify: |
|
 1-847-459-5207
|
|
